|
Clamping System
|
TAC Series
Features & Advantages
- Hydraulic travelling clamp can realize the automation of changing die.
- This type of clamp is greatly suitable for the slider of higher capacity press machine and able to reduce manufacturing costs and time considering it costs a lot of time changing die by humans
- The hydraulic clamp is mounted to the chain which travels into T slot of slider.
- The chain in the case is driven by air.
- TAC series clamp is included location sensor, which helps to aim at clamping die.
- No standardization of the back plate die required.
|
Model(TAC-xx-x-x-x-x-x)
|
TAC |
xx |
x |
x |
x |
x |
x |
|
Hydraulic travelling clamp |
Capacity |
Stroke |
Terminal Box(facing machine)
R：right
L：left |
Voltage |
Die Stand Thickness |
Distance between Fixed Stand and Slide |
Specification
|
Model |
|
TA-04 |
TA-06 |
TA-10 |
|
Clamping force(250kg/cm2) |
(tf) |
4 |
6.3 |
10 |
|
Clamping full stroke |
(mm) |
8 |
|
Hydraulic pressire |
(kg/cm2) |
250 |
|
permissible pressure |
(kg/cm2) |
375 |
|
Pneumatic pressure |
(kg/cm2) |
above 4 |
|
Moving speed |
(m/sec) |
0.14~0.20 |
|
Moving stroke |
(mm) |
400~1300 |
|
Voltage |
|
DC-24V |
AC-110V |
AC-220V |
|
ФT |
(mm) |
62 |
78 |
98 |
|
X |
(mm) |
63 |
69 |
77 |
|
Y |
(mm) |
24 |
16 |
6 |
|
ФN |
(mm) |
26 |
29 |
29 |
|
P |
(mm) |
30 |
37 |
46 |
Note
- Clamping stroke and extra stroke are for standard press dies
- Customized stroke is available on request
- Specify T-slot dimension (a, b, c, d) and die height (h) when ordering
|
